Analog TFT-LCD Panel

T373

The T373 is a highly integrated All-in-one Multimedia Processor that provides major cost saving solution for the Digital Photo Frame applications.  T373 has built-in high performance 32bit MCU, JPEG/MJPEG decoder, Mpeg 1/2/4 and RV 8/9/10 decoder, flash card reader, USB 2.0 OTG,TCON, triple DACs, Memory and TFT-LCD Backlight controller.  T373 could direct support most typed of analog and digital panels with refine and adjustable image quality.  T373 builds in Terawins high quality video processor engine and is easy to make the video/image quality better.

Application

  • Multimedia portable application

Features

  • 32-bit RISC CPU up to 120Mhz with MMU

    1. Baseline support. YCbCr-444, YCbCr-422, YCbCr-420, Grey-level
    2. Decoding speed up to 16 M pixels/sec
    3. Resolution upto 8192 x 8192
    4. Hardwired image rotation
    5. Frequency domain first-level scaling down
    6. Motion JPEG upto VGA@30FPS
    7. Built-in hardwired MPEG 1/2/4 decoder
    8. Upto 1280*720@30fps, <4Mb bit-rate
    9. Built-in hardwired RV 8/9/10 decoder
    10. Upto 1280x720@30fps, <1.5Mb bit-rate
    11. Two 10-bit Analog to Digital Converters(ADC)
    12. Support CVBS or S-Video input
    13. Support NTSC, PAL and SECAM TV standards.
    14. Luminance Enhancement (BLE, Contrast, Peaking, DLTi and Brightness adjustment)
    15. Scaler supports 2-D adaptive intra-field de-interlacer and non-linear 16:9 aspect ration.
    16. Digital Video input/output interface
    17. CCIR656/RGB565 input
    18. Analog RGB DACs drive panel directly, no external amplifier circuit needed.
    19. TTL&LVDS interface for digital panels.
    20. On-chip SAR for keypad, touch screen, battery voltage sensor.
    21. USB 2.0 high speed OTG controller up to 480 Mb/s
    22. Memory subsystem
    23. NOR flash controller – both SPI/PPI support
    24. NAND flash controller – support both SLC&MMC and on-board NAND for storage
    25. SDR-SDRAM controller – 16/32-bit data bus up to size of 256MB

    Flash card interfaces controllers

    1. SD/MMC
    2. MS/MS Pro
    3. xD/SM
    4. CF

    Descriptor-based DMA engine

      • Memory to Memory copy
      • Memory to IO device, IO device to Memory
      • IO device to IO device transfer
      • Built-in Real-Time Clock (RTC) for alarm function with battery
      • LQFP 256 pin
      • Voltage : 3.3V/1.8V