チップ製品

ラインアップ T113AI T120IB T120TA T123AI T200IS T527SA T530EA T530SA T537EA T581VT T582DB T613FD

製品特長

  • 型名：T200IS
  • 応用分野：Automotive, Security, White Goods, Industrial Consoles
  • デジタル入力信号：CCIR656/601
  • デジタル出力信号：sRGB，RGB888，ITU656，シングルチャネルLVDS。最大1280x1024の画素数まで対応可能
  • OSD：8K-word SRAM，グラフィックモードSPI-OSD(TWBC圧縮)
  • MCU：8052
  • その他の周辺：SAR，I2C，IR decoder，UART，SPI NOR flash x 2個
  • パッケージ：LQFP 128-pin

製品詳細

  • Cost Effective Graphics OSD
    • -Max 9 arbitrary graphics OSD windows (8-FOO + 1-BOO)
    -32-bit true color RGBA
    -Supports full-screen sliding effect
    -No frame buffer required
    -OSD pixel data stored in SPI NOR flash memory.
    -Rendering multi-format OSD data
  • HD Video Input Ports
    • -2 HD Video Input Ports support up to 1080p@30fps
    -Low pin counts: 8-bit BT656 or 8-bit BT601 plus HSync and VSync Panel Interface/Video Output
    -1-CH 24b RGB LVDS TX up to 74.25Mhz
    -TTL 24b RGB or 18b RGB output
    -8-bit serial RGB
    -Supports i80 panel
    -Supports BT656/BT601 output formats
  • Built-in Font OSD Engine
    • -8K-word OSD SRAM.
    -Built-in 114+ fonts(18x12)
    -Supports font or bitmap modes
    -Supports character blinking, overlay, shadow and border functions
    -Fully programmable character mapping
    -Supports alpha blending & Zoom-in/Zoom-out function
    -Optional fonts can be stored in off-chip SPI NOR Flash.
    -Supports free run OSD mod
  • Digital Video Processing
    • -2-D video de-interlacer
    -Brightness, contrast, saturation and hue adjustment
    -Digital Luma Transient Improvement(DLTI)
    -Digital Chroma Transient Improvement(DCTI)
    -Coef. Programmable color space converter
    -3-ch gamma correction
    -Black Level Extension(BLE) and White Level Extension(WLE)
    -White balance color correction
    -Independent vertical and horizontal scaling
    -Supports horizontal non-linear scaling for 16:9/16:10 panels
    -Coefficient based sharpness filters
    -Programmable standard & special panel burn-in test patterns
  • Embedded MCU 8052
    • -Code Banking
    -Native Port 0 on XGPIO00~07
    -Native UART0 on RS232TX0/RX0 or RS232TX1/RX1
    -On-chip 4KB XRAM or 3KB XRAM + 1KB PRAM
    -On-chip 4KB cache controller
    -Programmable Watchdog Timer
  • Dual Quad SPI NOR Flash Controllers
    • -Supports MCU bootloader
    -MCU XIP(Execute in Place)
    -Single/Dual/Quad mode
    -SPI Clock: up to 120Mhz
    -Storage: Supports up to 512Mb
    -MCU program code and OSD data can reside in the same NOR flash memory
  • Peripherals
    • -Digital PWM Controllers
    -Two SAR ADCs(2 channels each one)
    -I2C Master/Slave
    -Programmable 36-bit GPIO
    -Three UARTs
  • Packages: 128-pin LQFP