Applications:Automotive, Security, White Goods, Industrial Consoles
Digital Inputs:CCIR656/601
Digital Output Signal:sRGB,RGB888,ITU656,Single-Channel LVDS. Support up to 1280x1024
OSD:8K-word SRAM,SPI-OSD TWBC Compression
MCU:8052
Other Peripherals:SAR,I2C,IR decoder,UART,Two SPI NOR Flash
Package:LQFP 128-pin
Details
Cost Effective Graphics OSD
-Max 9 arbitrary graphics OSD windows (8-FOO + 1-BOO)
-32-bit true color RGBA
-Supports full-screen sliding effect
-No frame buffer required
-OSD pixel data stored in SPI NOR flash memory.
-Rendering multi-format OSD data
HD Video Input Ports
-2 HD Video Input Ports support up to 1080p@30fps
-Low pin counts: 8-bit BT656 or 8-bit BT601 plus HSync and VSync Panel Interface/Video Output
-1-CH 24b RGB LVDS TX up to 74.25Mhz
-TTL 24b RGB or 18b RGB output
-8-bit serial RGB
-Supports i80 panel
-Supports BT656/BT601 output formats
Built-in Font OSD Engine
-8K-word OSD SRAM.
-Built-in 114+ fonts(18x12)
-Supports font or bitmap modes
-Supports character blinking, overlay, shadow and border functions
-Fully programmable character mapping
-Supports alpha blending & Zoom-in/Zoom-out function
-Optional fonts can be stored in off-chip SPI NOR Flash.
-Supports free run OSD mod
Digital Video Processing
-2-D video de-interlacer
-Brightness, contrast, saturation and hue adjustment
-Digital Luma Transient Improvement(DLTI)
-Digital Chroma Transient Improvement(DCTI)
-Coef. Programmable color space converter
-3-ch gamma correction
-Black Level Extension(BLE) and White Level Extension(WLE)
-White balance color correction
-Independent vertical and horizontal scaling
-Supports horizontal non-linear scaling for 16:9/16:10 panels
-Coefficient based sharpness filters
-Programmable standard & special panel burn-in test patterns
Embedded MCU 8052
-Code Banking
-Native Port 0 on XGPIO00~07
-Native UART0 on RS232TX0/RX0 or RS232TX1/RX1
-On-chip 4KB XRAM or 3KB XRAM + 1KB PRAM
-On-chip 4KB cache controller
-Programmable Watchdog Timer
Dual Quad SPI NOR Flash Controllers
-Supports MCU bootloader
-MCU XIP(Execute in Place)
-Single/Dual/Quad mode
-SPI Clock: up to 120Mhz
-Storage: Supports up to 512Mb
-MCU program code and OSD data can reside in the same NOR flash memory
Peripherals
-Digital PWM Controllers
-Two SAR ADCs(2 channels each one)
-I2C Master/Slave
-Programmable 36-bit GPIO
-Three UARTs